Autel PowerScan PS100 37ft Automotive Circuit Tester 12V/24V Electrical AVOmeter

Description

The tool is the best electrical tester for reducing diagnostic time in all 6- to 30-volt vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery, you can: 1.determine at a glance if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another. 2.test for continuity with its built-in auxiliary ground lead. 3.by depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of anelectrical component without the use of jumper wires. 4.test for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded. 5.follow and locate short circuits without w
Store category
Sign Up Now !
You may also like
Autel PowerScan PS100 37FT Automotive Circuit Tester 12V/24V Electrical AVOmeter
Product Description
Autel PowerScan PS100 Vedio Show:
Please Notes:
1. We are authorized seller of Autel. We promise 100% genuine and original!! if not We double compensation!!
2.
Fast Shipping from USA Overseas warehouse
Overviews:
The PowerScan Tool is the most revolutionary circuit tester to date. Featuring
AVOmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and bad ground indicator
, the PowerScan is truly the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician looking for a fast and accurate solution to electrical system diagnostics.
Autel PowerScan PS100 Electrical System Diagnostics
The tool is the best electrical tester for reducing diagnostic time in all
6- to 30-volt vehicle electrical systems. After
a simple hook-up of
the tool to the
vehicle's battery, you can:
√ 1.
determine at a glance if a circuit is positive, negative, or open
without having to reconnect clips from one battery pole
to
another.
√
2.
test for continuity with its built-in auxiliary ground lead.
√ 3.
by depressing the power switch, conduct a positive or negative
battery current to the probe tip for testing the function
of an
electrical component
without the use of jumper wires.
√
4.
test for poor ground contacts instantly without performing
voltage drop tests. The tool is also short-circuit protected;
its
internal circuit breaker
will
trip if it becomes overloaded.
√
5.
follow and locate short circuits without wasting fuses. The tool's
long cable allows you to test along the entire length
of the
vehicle without
constantly searching for suitable vehicle grounds.
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
Autel PowerScan PS100 Features:
⏳ 1.Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity
testing and components
activation
⏳
2.Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip
⏳
3.With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like
cooling fans, relays, etc.
⏳
4.Simultaneously uses the hot lead and the ground lead to activate components right in your hand
⏳
5.Instantly identifies positive, negative and open circuits
⏳
6.Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses
⏳
7.Instantly checks continuity of switches, relays and diodes
⏳
8.Circuit breaker protected
⏳
9.Built-in Flashlight enables you to work in the dark
⏳
10.Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment
⏳
11.Long
cable
6M/20ft (extendable) provides excellent accessibility to test along the vehicle
20ft Extendable Cable
It is allows you to easily check the entire circuit system of the vehicle.
Following & Locating Short Circuits
Remove the blown fuse from the fuse box.Use the probe tip to activate and energize each of the fuse contacts to find to short circuits
Audio tone Indicator
Allows for no-look menu scrolling once users are familiar with menu tone assignment.
It is invaluable when working in bright areas where LED illumination alone is not sufficient.
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
Autel PowerScan PS100 4 Work Mode:
There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and
cycling through each one.
Mode1
DC Voltage
In this mode, contact the
probe tip to a circuit,
then
the LCD display
will read
the DC voltage
with a
resolution of 0.1
volt.
This also lets you
check the
function and
orientation of
the
connector and trailer
lights.
Mode2
AC Voltage
While the tool in this
mode,
contact the probe
tip to a
circuit, then the
LCD display
will read
the
Max. voltage,
the Min. voltage,
frequency
and duty cycle
.
Mode3
Resistance
While the tool in this
mode,
contact the probe
tip to a
circuit, then the
LCD display
will read
the resistance
between
the tip and auxiliary
ground lead.
Mode4
Tone On/Off
This function is
invaluable
when
working in bright
areas where LED
illumination alone is not
sufficient.
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
PS100
Compared with Other Products
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
Test Applications
Circuit Breaker
The tool is short-circuit protected. Its internal circuit breaker will trip if it becomes overloaded. The circuit breaker is a valuable test tool as well as a safety measure to protect the tool from overload.
Voltage & Polarity Testing
Continuity Testing
NOTE:
You can use the probe tip to pierce the plastic insulation on a wire. This means that you can test the circuit without disconnecting anything.
Signal Circuit Testing
Once you extract a DTC from the vehicle and realize that troubleshooting begins with some kind of sensor circuit, there is a quick test you can perform to verify the code. Testing your sensor is easy while using the tool.
For example, you suspect there is a problem with your M.A.P. sensor circuit, then follow the procedure involved with testing this sensor:
 Set the tool in AC Voltage mode, using the probe tip with chassis ground or the auxiliary ground lead.
 Connect vacuum pump to MAP sensor.
 Contact the probe tip to the MAP sensor positive terminal and observe the LCD readings which should be a sine wave in normal condition.
 Apply vacuum.
 Release vacuum and observe the LCD readings.
Activating Components in Your Hand
Testing Trailer Lights and Connections
Activating Components in The Vehicle
WARNING : Haphazardly applying voltage to certain circuits can cause damage to a vehicle’s electronic components. Therefore, it is strongly advised to use the vehicle manufacturer’s schematic and diagnosing procedure while testing.
Activating Components w/Ground
Checking for Bad Ground Contacts
Keep in mind that high current components such as
starter
motors will also trip the circuit breaker.
Red/Green Polarity LED
The Red/Green Polarity LED lights up when the probe tip voltage matches the battery voltage within ±0.8 volts. It is added informationthat could be valuable to the technician.
The difference between the battery voltage and what is read on the circuit is either voltage drop or voltage increase. This allows you to determine a voltage drop without running back to check the battery. It's just another one of time saving feature the tool has.
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
Autel PowerScan PS100
Specifications:
DC Voltage Range
0-65V +1 digit
Resistance Range
0-200 KΩ
Tone Frequency
0Hz to 10Khz
External Power
12.0 or 24.0 V power provided via vehicle battery
Operating Temperature
0 to 60°C (32 to 140 F°)
Size
4.96"*1.83"*1.38"
NW
0.23lbs/1.6lbs
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
① Probe Tip--Contacts the circuit or component to be tested.
② Head Lights--Illuminates dark work areas or work areas at night.
③ Red/Green Polarity Indicator--Indentifies positive,negative or open circuits.The RED Indicator lights when the Probe
Tip is contacting a positive
circuit. The GREEN Indicator lights when the Probe Tip is contacting a negative circuit.
④ LCD Display –Indicates test results.
⑤ Circuit Breaker Reset – Resets the tool when the Circuit Breaker is tripped.
⑥ Power Switch – Allows you to conduct a positive or negative battery current to the tip for activating and testing the
function of electrical
components.
⑦ Mode Button – Selects the work mode: AC voltage, DC voltage, resistance, tone.
⑧ Speaker – When the audio tone is turned on, a beep will be heard.
⑨ Auxiliary Ground Lead – Assists test as a ground lead.
⑩ Adaptor – Connects to the battery.
Autel PS100 FAQ:
1.Is the PowerScan Probe Tester computer and air bag safe?
The tool LED and LCD pull no more than 1 milliamp of current,therefore when using it as a test light or multimeter it is
computer and airbag safe.
However, pressing the power switch is a different story. When you press the switch forward, you are conducting full
battery current to the tip of the
probe. There is a nice safety feature built into the tool. Simply connect the extra ground
lead to the tool and press the power switch forward until it
trips the circuit breaker.This will prevent power from going to
the tip but still allow you to use the tool as a multimeter. When you are away from
computer components, simple press the
reset button and you are ready to power up again.
2.Why do I have no power at the tip when I am pressing the power switch forward but the red LED is on?
The power switch goes through a lot. It is one of the few things that go wrong with the tool. The switch is a consumable
that needs to be replaced on
occasion. We have made it real simple to not only change it but also buy a new switch. The
switch can be snapped out and replaced in seconds. You
can buy switches from your Autel authorized tool supplier. The
tool with the Rocker Switch slots makes it easy to replace a worn switch in the field
without having to send it in for repair.
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
Autel PowerScan PS100 Package including:
1 × PowerScan PS100
1 × Rugged blow molded case
1 × 20ft. extension cable
1 × Probe tip
1 × Battery hookup clips
1 × Cigarette lighter adapter
1 × User's Manual
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal only.
All major credit cards are accepted through secure payment processor PayPal.
Payment must be received within
3 days
of auction closing.
When buying multiple items, please use the eBay shopping cart and check out once for all the items instead of paying for them individually.When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
Please Note
Import duties,taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding /buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We are not responsible for custom duties and related taxes. Orders will be shipped as a gift or as a sample. In general, no custom duties and tax will be charged.
Delivery details
The default shipping method is via
UPS or USPS
which will take about
2-6 business Days
in transmit for the hot season is coming. Please kindly be patiently wait for your order.
We will ship according to your EBAY address but sorry that we
can not accept P.O.BOX address.
Please make sure it’s correct and include
phone number via PayPal when you make payment
. This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information.If you need to change your address, Please change it in PayPal first before you pay.
Items are generally shipped out
within next 2 business days after payment has been verified
. All items are shipped by
Standard Registered Airmail
.
Terms of sales
12 months free repair
for the devices.
3 months for the accessories.
Items should be returned on buyers’ cost for repair or replacement.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in
30 days
and keep it
unused
.
We will instruct you on how to return and get refund or replacement.
If after 30 days, or the item has been used, we have the right to decline your claim.
About us
WHO WE ARE?
We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness.
WHAT WE HAVE?
We have office in Shenzhen,China and 2 warehouses that are located in HongKong and US.We assure you not only good service but also to be ship as soon as possible.
Contact us
We are committed to your satisfaction after your purchase.
If you are not satisfied with your purchase in any way please
give us an opportunity to try
and make it right before leaving feedback.We will answer your questions within 1 working days.
Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)
On Jul-05-21 at 20:05:14 PDT, seller added the following information: