Automotive Engine System Signal Pro Inductive Pickup Lead Set Clamp Spark Plug

Description

Special Offers
Newly Listed
All Auctions
Buy It Now
Contact Us
Shop Category
Store Home
Automotive Tester
Digital Multimeter
Digital Clamp Meter
Voltage Tester
Environment Tester
Battery Tester
Metal Detector
Pen Probe Digital Multimeter
Stud Finder
Wood Moisture Tester
Handheld Digital Scopemeter
Professional Tester
Home Meter
Netcable Tester
Other
Automotive Engine System Signal Sampling Clamp Spark Plug Test Leads Accessories
This instrument is designed to be used with automotive meter or oscillograph. It can be used in the adjustment and diagnosis of automotive engine. Using this instrument and an automotive meter, you can accurately measure some parameters of engine system.. It is very easy to use.
Operating instruction
1. Connect the clamp of the instrument to a spark plug wire with the mark “→” on the instrument pointing to the spark plug.
2. Connect the plugs of the instrument to the input terminals of the automotive meter (The black plug of this instrument should be connect to “COM” jack of the automotive meter)
Set the automotive meter in corresponding measuring range.
Then you can read the value on the display, If no reading is received, unhook the clamp, turn it over and connect again.
Note
1. Position the Signal Pick Up as far away from the distributor and the exhaust manifold as possible.
2. The distance between the spark plug and the clamp of the instrument must be less than 10cm during test, and the ignition frequency of the engine ignition system must be between 10Hz and 400Hz.
3. Because different engines may have different ignition systems, the instrument’s test range of engine rotation speed may vary with different engines. As a result, roration speed measurement should be performed according to the actual situation.
Specification
Operating Temperature:
0℃ to 60℃ , relative humidity
Dimensions:
98x35x20mm (for main body only)
Weight:
about 105g
Item Specifics
Brand
all-sun
Model
EA103
Country/Region of Manufacture
China
Warranty
Yes
Type
Engine Signal Sampling Plug
Operating Temperature
0℃ to 60℃ , relative humidity
Dimensions
98x35x20mm (for main body only)
Weight
about 105g
MPN
allsunEA103
Manufacturer Part Number
allsunEA103
Accessories
User Guide
Vehicle Type
ATV
Volt
None
UPC
788537552833
Shipping
Returns
Customer Services
Copyright of XXXX. All rights reserved.
Powered by SoldEazy
On Apr-22-19 at 01:38:36 PDT, seller added the following information: