York 14.5 Seer 2 Ton Heat Pump Split System w/10kw Heat Strips, Stat and Lineset

Description

YORK
Lx Series
14.5 Seer Series
(15 Seer Matched)
2 Ton Heat Pump System
208/230v 1ph
AHRI RATING#4455012
System includes:
YHJF24S41S1-
2 Ton Heat Pump Condenser
(29.5" Wide x 29.5" Deep x 40.25" Tall 145Lbs +/-)
AHE24B3XH21-
2 Ton Mult-Positional Air Handler 120LBS +/-
(17.5" Wide x21.5" Deep x 46" Tall) Vertical Position
(17.5" Tall x 21.5" Deep x 46" Wide) Horizontal Postion
S1-6HK16501006C-
10KW Heat Strips
Emerson 1F85U-42NP
Universal Thermostat
50ft of 3/4"x3/8"x1/2"
Copper Lineset
*Wade's Personally offers 1 year parts warranty from
Date of Purchase.
Registration with York within 90 days of purchase is required for any additional extended Factory warranty to be available.
As long as the equipment is registered properly you can expect the equipment to be covered for a minimum of 5 year parts and 10 year compressor warranty.
This does not include Labor!!  Please check with your local York distributor for any additional extended warranty options.
(System in picture may not be the one you receive, but will be identical in appearance and Model)
Condenser Features and Benefits
FEATURES
•
Small Footprint -
The compact footprint is a perfect fit for
any application.
• Quality Condenser Coils -
The coil is constructed of copper
tubing and enhanced aluminum fins for increased performance.
• Coil Protection -
Coils are protected from damage by a slotted, stamped steel coil guard.
• Protected Compressor -
Compressors are protected internally by a high pressure relief valve and a temperature sensor, and externally by the system high and low pressure
switches. A factory installed liquid line filter-drier further protects the compressor against moisture and debris. The 5-ton
system utilizes a two-stage compressor.
• Environmentally Friendly Refrigerant -
The next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish -
The cabinet is made of G90-equivalent prepainted steel, with special primer formulas and matte champagne texture to insure less fading when exposed to sunlight. The coated steel wire fan guard and pre-treated,
galvanized steel chassis components resist corrosion and
rust creep.
• Lower Installed Cost -
Installation time and costs are
reduced by easy power and control wiring connections. The
unit is factory charged for a 15-foot lineset. The small base
dimension means less space is required on the ground or
roof.
• Top Discharge -
Warm air from the top mounted fan is blown
up, away from the structure and any landscaping. This allows
compact location on multi-unit applications.
• Quiet Operation -
The compressor sound blanket and the
swept wing fan blade keep sound to a minimum. The upward
air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor
sound. Isolator mounted compressor and the condenser coil
muffle the normal fan motor and compressor operating
sounds.
• Low Maintenance -
Long life, permanently lubricated motorbearings need no annual servicing.
• Easy Service Access -
Fully exposed refrigerant connections and a single panel covering the electrical controls make
for easy servicing of the unit.
• Secured Service Valves -
Secured, re-usable service
valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
• Advanced System Control -
These heat pumps feature a
demand-defrost control system to provide optimal comfort
and reliable operation over a wide range of conditions.
• Agency Listed -
Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program
Air Handler Feature and Benefits:
•
Insulated Cabinet -
All air handler cabinets are thermally insulated with 3/4” foil faced insulation to prevent sweating.
•
Factory Sealed -
Achieves 2% or less total airflow leakage rate at duct blaster field test conditions for system airflow verification.
•
Durable Finish Inside and Out -
Air handler casings are made of pre-painted galvanized steel which provides a better paint to
steel bond that resists corrosion and rust creep. All internal coil sheet metal parts are made of G60 galvanized or prepainted
G30 galvanized.
•
Filters -
All models have internal filter racks provided for use with 1” thick standard size filters.
•
Electric Heat Kits -
New 6HK series of field installed electric heat kits are available for installation friendly and easy service
applications. These 6HK kits are unique to these new models.
•
High Efficiency Blowers -
All models use high efficiency brushless DC motors to provide cooling SEER rating enhancement.